PSI to Bar Converter
Convert between PSI (pounds per square inch) and Bar pressure units instantly. Features bidirectional conversion, visual pressure gauge, common presets for tires, SCUBA, and industrial applications, plus multi-unit comparison table.
Your ad blocker is preventing us from showing ads
MiniWebtool is free because of ads. If this tool helped you, please support us by going Premium (ad‑free + faster tools), or allowlist MiniWebtool.com and reload.
- Allow ads for MiniWebtool.com, then reload
- Or upgrade to Premium (ad‑free)
About PSI to Bar Converter
The PSI to Bar Converter is a comprehensive pressure unit conversion tool that allows you to instantly convert between PSI (pounds per square inch) and Bar. Whether you need to check tire pressure, work with industrial equipment, or understand SCUBA tank specifications, this converter provides accurate results with visual feedback and multi-unit comparisons.
What is the Conversion Factor from PSI to Bar?
1 PSI equals approximately 0.0689476 bar. To convert PSI to bar, multiply the PSI value by 0.0689476. For example, 30 PSI equals 2.07 bar (30 x 0.0689476 = 2.0684).
What is the Conversion Factor from Bar to PSI?
1 bar equals approximately 14.5038 PSI. To convert bar to PSI, multiply the bar value by 14.5038. For example, 2 bar equals 29.01 PSI (2 x 14.5038 = 29.01).
Common PSI to Bar Conversion Table
| PSI | Bar | Common Use |
|---|---|---|
| 14.7 | 1.01 | Sea level atmospheric pressure |
| 25 | 1.72 | Mountain bike tires |
| 32 | 2.21 | Standard car tires |
| 35 | 2.41 | SUV tires |
| 40 | 2.76 | Road bicycle tires |
| 80 | 5.52 | Heavy truck tires |
| 100 | 6.89 | Industrial pneumatics |
| 200 | 13.79 | SCUBA tank (low) |
| 3000 | 206.84 | SCUBA tank (full) |
What is the Recommended Tire Pressure in PSI and Bar?
Recommended tire pressures vary by vehicle type:
- Passenger Cars: Typically 30-35 PSI (2.07-2.41 bar)
- SUVs and Light Trucks: Usually 35-40 PSI (2.41-2.76 bar)
- Road Bicycles: 80-130 PSI (5.52-8.96 bar)
- Mountain Bikes: 25-35 PSI (1.72-2.41 bar)
- Heavy Trucks: 80-100 PSI (5.52-6.89 bar)
- Motorcycles: 28-40 PSI (1.93-2.76 bar) depending on type
What is the Difference Between PSI and Bar?
PSI (Pounds per Square Inch) is an imperial unit of pressure primarily used in the United States. It measures the force in pounds applied to one square inch of area.
Bar is a metric unit of pressure commonly used in Europe and most other countries worldwide. One bar is approximately equal to atmospheric pressure at sea level (1 atm = 1.01325 bar). Bar is preferred in scientific and industrial applications due to its compatibility with the metric system.
Regional Usage
- United States: PSI is standard for tire pressure, HVAC systems, and most consumer applications
- Europe: Bar is used for tire pressure, industrial systems, and meteorology
- Scientific Applications: Pascal (Pa) or kilopascal (kPa) are often preferred, though bar is common in applied sciences
- Aviation: Both units are used, with increasing adoption of hectopascals (hPa) for altitude settings
How Do I Check My Tire Pressure?
- Get a tire pressure gauge: Digital or analog gauges both work well. Many gas stations have air pumps with built-in gauges.
- Check when tires are cold: Wait at least 3 hours after driving, or drive less than 1 mile. Heat from driving increases pressure readings.
- Remove the valve cap: Unscrew the cap from the tire's valve stem and keep it safe.
- Press gauge firmly: Push the gauge straight onto the valve stem. You should hear a brief hiss of air.
- Read the pressure: Digital gauges display the number directly. On analog gauges, read where the bar stops.
- Compare to recommended pressure: Check your door jamb sticker for the correct pressure. Add or release air as needed.
- Replace the valve cap: Screw it back on to prevent dust and moisture from entering.
Understanding Pressure Units
PSI (Pounds per Square Inch)
PSI measures pressure as the force in pounds exerted on one square inch of surface area. It is widely used in the US for tire pressure, compressed air systems, and hydraulics. Standard atmospheric pressure at sea level is approximately 14.7 PSI.
Bar
Bar is a metric unit where 1 bar equals 100,000 Pascals. It was introduced to simplify pressure calculations in the metric system. Atmospheric pressure at sea level is approximately 1.01325 bar. Bar is convenient because it closely approximates atmospheric pressure.
Other Common Pressure Units
- Pascal (Pa): The SI unit of pressure, equal to one Newton per square meter
- Kilopascal (kPa): 1,000 Pascals, commonly used for tire pressure in metric countries
- Atmosphere (atm): Based on average sea-level air pressure
- Millimeters of Mercury (mmHg): Used in medicine for blood pressure
- Inches of Mercury (inHg): Used in aviation and weather reporting
Pressure in Different Applications
Automotive
Proper tire pressure is crucial for safety, fuel efficiency, and tire longevity. Under-inflated tires increase rolling resistance (reducing fuel economy), cause uneven wear, and can overheat. Over-inflated tires reduce grip and cause harsh ride quality.
SCUBA Diving
SCUBA tanks are typically rated at 3000 PSI (207 bar) or 3500 PSI (241 bar) when full. Divers monitor tank pressure throughout their dive to ensure adequate air supply for safe ascent.
Industrial Applications
Pneumatic tools typically operate at 90-120 PSI (6.2-8.3 bar). Industrial hydraulic systems may use pressures exceeding 5000 PSI (345 bar) for heavy machinery.
Medical
Blood pressure is measured in mmHg (millimeters of mercury). Normal blood pressure is around 120/80 mmHg, equivalent to about 2.3/1.5 PSI or 0.16/0.11 bar.
Frequently Asked Questions
What is the conversion factor from PSI to Bar?
1 PSI equals approximately 0.0689476 bar. To convert PSI to bar, multiply the PSI value by 0.0689476. For example, 30 PSI equals 2.07 bar (30 x 0.0689476 = 2.0684).
What is the conversion factor from Bar to PSI?
1 bar equals approximately 14.5038 PSI. To convert bar to PSI, multiply the bar value by 14.5038. For example, 2 bar equals 29.01 PSI (2 x 14.5038 = 29.01).
What is the recommended tire pressure in PSI and Bar?
Recommended tire pressures vary by vehicle: Car tires typically need 30-35 PSI (2.07-2.41 bar), bicycle tires range from 40-65 PSI (2.76-4.48 bar) for road bikes and 25-35 PSI (1.72-2.41 bar) for mountain bikes, and truck tires often require 80-100 PSI (5.52-6.89 bar).
What is the difference between PSI and Bar?
PSI (pounds per square inch) is primarily used in the United States and measures pressure as pounds of force per square inch. Bar is a metric unit commonly used in Europe and most other countries, where 1 bar is approximately equal to atmospheric pressure at sea level. Bar is preferred in scientific and industrial applications due to its metric compatibility.
How do I check my tire pressure?
Use a tire pressure gauge when tires are cold (not driven for at least 3 hours). Remove the valve cap, press the gauge firmly onto the valve stem, and read the pressure. Compare with the recommended pressure on the driver's door jamb sticker or owner's manual. Add or release air as needed.
Reference
Reference this content, page, or tool as:
"PSI to Bar Converter" at https://MiniWebtool.com/psi-to-bar-converter/ from MiniWebtool, https://MiniWebtool.com/
by miniwebtool team. Updated: Jan 06, 2026