Contraction Timer
Time contractions with one tap and see how far apart they are, how long each lasts, how regular they are, and whether you have reached your 5-1-1, 4-1-1 or 3-1-1 call point, with MiniWebtool’s Contraction Timer.
For Gemini, paste the copied question into the chat. You can also copy it below.Need help using this tool? Ask AI
View the question
Tap once when a contraction starts and again when it ends. The timer tracks how far apart and how long they are, ticks off each part of your 5-1-1 (or 4-1-1, 3-1-1) rule, and tells you when to call.
About Contraction Timer
The Contraction Timer records each contraction with one tap and turns the log into the two numbers your midwife or hospital will ask for: how far apart your contractions are (frequency, measured start to start) and how long each one lasts (duration). It also scores how regular the pattern is, tracks your 5-1-1, 4-1-1 or 3-1-1 call point automatically, draws your labor on a timeline, keeps your screen on, and gives you a summary to send to your midwife. Your log stays on your own device.
At a Glance
The Contraction Timer times each contraction with one tap, shows how far apart and how long they are, tracks your 5-1-1, 4-1-1 or 3-1-1 call point, and gives you a summary and PDF to share with your midwife.
| Feature | What you get | Good for |
|---|---|---|
| One-tap timer | A big start/stop button (or the space bar) that records each start time and duration. | Timing on a phone during labor |
| Call-point tracker | Three live meters for 5-1-1, 4-1-1 or 3-1-1 and a clear call-now message when the pattern is met. | Knowing when to call or go in |
| Regularity and trend | Rates how steady the gaps are and whether they are getting closer together. | Telling real labor from practice contractions |
| Waters broke button | Logs the time your waters broke and shows a call-now reminder. | Emergencies that should not wait |
| Keep screen on | Stops the screen dimming, and a running contraction survives a page reload. | Partners timing through the night |
| Summary and PDF | A short summary to paste into a message and a downloadable PDF of the full log and charts. | Sharing with a midwife or hospital |
How to Time Contractions Correctly
Most timing mistakes come from measuring the gap the wrong way. Contraction frequency is measured from the start of one contraction to the start of the next — it includes the contraction itself, not just the rest. Contraction duration runs from the first tightening until the muscle fully relaxes.
How far apart = start of one contraction → start of the next
How long = start of a contraction → the moment it fully eases off
Rest = how far apart − how long
So contractions that are 5 minutes apart lasting 60 seconds give you about 4 minutes of rest between them. As labor advances, frequency falls, duration rises, and the rest shrinks — which is exactly what the timeline in the results makes visible.
What the 5-1-1 Rule Means
The 5-1-1 rule is the checkpoint most hospitals teach for a first, uncomplicated pregnancy:
- 5 — contractions arriving every 5 minutes or less
- 1 — each lasting at least 1 minute
- 1 — with that pattern holding for at least 1 hour
The three live meters in the timer fill up as you get closer, so you can see which condition is still missing instead of guessing.
5-1-1, 4-1-1 or 3-1-1: Which Call Point Is Yours?
Many midwives and doctors give a tighter rule when labor is likely to move faster or the trip is longer. Pick yours above the timer and every meter, verdict and chart follows it.
- 5-1-1 — the usual advice for a first baby and an uncomplicated pregnancy.
- 4-1-1 — often given for a second or later baby, or when the hospital is a long drive away.
- 3-1-1 — sometimes given when the hospital is close, or for a planned birth center arrival.
Use the numbers you were personally given; the rule is a rule of thumb, not a law. If you were told something different, such as "come in when they are 10 minutes apart", follow that.
If Your Waters Break
Call your midwife or hospital straight away, whatever the contractions are doing. Tap 💧 My waters broke in the timer: the time goes into your summary and PDF, and the timer shows a call-now reminder. Have ready the time it happened, the colour of the fluid (clear, pink, green or brown) and roughly how much there was.
Contraction Patterns by Labor Phase
| Phase | Frequency | Duration | What it usually feels like |
|---|---|---|---|
| Practice (Braxton Hicks) | Irregular, often over 20 min apart | 15–30 sec | Tightening that fades when you move, rest or drink water |
| Early labor | 5–20 min apart | 30–45 sec | Manageable, you can still talk and walk through them |
| Active labor | 3–5 min apart | 45–70 sec | Strong, regular, hard to talk during one |
| Transition | 2–3 min apart | 60–90 sec | Very intense with little rest; usually the shortest phase |
| Pushing | 2–5 min apart | 60–90 sec | Strong urge to push with each contraction |
These ranges are typical, not universal. Plenty of healthy labors never look like the table — which is why the timer reports your own averages and regularity rather than only matching you to a row.
Real Labor or Braxton Hicks? What the Regularity Score Tells You
🔥 True labor contractions
- Come at increasingly regular intervals
- Get longer, stronger and closer together
- Keep coming whatever you do
- Often felt in the back and lower belly, wrapping around
- May come with a bloody show or waters breaking
🌙 Practice (Braxton Hicks) contractions
- Irregular — the intervals jump around
- Stay short and do not build in strength
- Often ease off with rest, a position change or water
- Usually felt only at the front of the belly
- Can appear for weeks before labor
This is why the timer shows a regularity rating next to the averages. It looks at how much your recent gaps vary: gaps that stay about the same are a labor-like rhythm, gaps that jump around are typical of practice contractions. Together with the trend — are the gaps shrinking or drifting apart? — it answers the most common early-labor question, one a plain stopwatch cannot.
How to Use This Contraction Timer
- Pick your call point: choose 5-1-1, 4-1-1 or 3-1-1, whichever your midwife or doctor gave you.
- Tap when a contraction starts: press the big Contraction Started button as soon as the tightening begins to build. On a laptop the space bar does the same thing.
- Tap again when it eases off: press Contraction Ended when the muscle fully relaxes. The entry is added to your log with its start time and duration.
- Keep timing for about an hour: the live panel updates the average frequency, average duration, regularity and 5-1-1 progress after every contraction.
- Click Analyze Pattern: get your labor phase, the full 5-1-1 check, the timeline, the trend chart with a projection, and a summary you can read out or copy for your provider.
Between contractions, rest — do not watch the clock. The log is saved on your device after every tap, so you can close the page; a contraction you are timing keeps counting even if the page reloads. Copy summary gives you plain text to paste into a message or read out at triage, and Download log (PDF) saves the whole analysis as a file.
When to Call Your Provider
Call when you reach the pattern you were told to watch for (usually 5-1-1), and call immediately, whatever your timer says, if any of the following happen:
- Your waters break, or you have a sudden gush or steady leak of fluid
- Any vaginal bleeding
- Constant severe pain that does not ease between contractions
- Fever, chills, severe headache, blurred vision or swelling of the face and hands
- The baby is moving noticeably less than usual
- You are less than 37 weeks pregnant and having regular contractions
- You simply feel that something is wrong
Frequently Asked Questions
How do you time contractions?
Start the timer the moment a contraction begins to build and stop it when the tightening fully eases off. That gives you the duration. Frequency is measured from the start of one contraction to the start of the next, not from the end of one to the start of the next. Time contractions for about an hour so a pattern can be seen, and write down or save every entry.
What is the 5-1-1 rule?
The 5-1-1 rule is a common checkpoint for when to call your provider or go to hospital: contractions coming every 5 minutes or less, each lasting at least 1 minute, in a pattern that has held for at least 1 hour. Some providers use 4-1-1 or 3-1-1 instead, especially if you live far from the hospital or have had a fast labor before, so follow the numbers your own provider gave you.
What is the difference between contraction frequency and duration?
Duration is how long a single contraction lasts, measured in seconds. Frequency is how often contractions arrive, measured in minutes from the start of one to the start of the next. A contraction that lasts 60 seconds and arrives every 5 minutes leaves about 4 minutes of rest in between. Providers ask for both numbers because together they describe the strength of the labor pattern.
How do I tell real labor from Braxton Hicks contractions?
True labor contractions get longer, stronger and closer together over time and keep coming whatever you do. Braxton Hicks or practice contractions are usually irregular, stay short, do not intensify, and often ease off when you change position, empty your bladder or drink a large glass of water. This timer shows a regularity score for exactly that reason: a steady rhythm with a tightening trend points to true labor, while scattered gaps with no trend point to practice contractions.
How far apart are contractions in early labor?
In early labor contractions are typically 5 to 20 minutes apart and last about 30 to 45 seconds. In active labor they come every 3 to 5 minutes and last 45 to 70 seconds. During transition they can be 2 to 3 minutes apart and last 60 to 90 seconds. These ranges are typical rather than universal, and every labor is different.
Can I use 4-1-1 or 3-1-1 instead of 5-1-1?
Yes. Choose 5-1-1, 4-1-1 or 3-1-1 above the timer and every meter, verdict and chart switches to that rule. Providers often give 4-1-1 or 3-1-1 for a second or later baby, a long drive to hospital, or a previous fast labor. Use the numbers your own midwife or doctor gave you.
What should I do if my waters break?
Call your midwife or hospital straight away, whatever your contractions are doing. Note the time, the colour of the fluid and roughly how much there was. Tap the My waters broke button in the timer and the time is added to your log, your summary and your PDF.
Will my phone screen stay on while I time contractions?
On most current phones and browsers, yes. The Keep screen on switch asks the browser to stop the screen dimming while the page is open. Your log is saved on the device after every contraction, and a contraction you are timing keeps running even if the page reloads.
When should I call my provider or go to the hospital?
Call when you reach the pattern your provider gave you, usually 5-1-1, and call immediately regardless of the pattern if your waters break, you notice bleeding, you have constant severe pain, a fever, reduced baby movements, or you are less than 37 weeks pregnant. If anything feels wrong, call. A timer is a guide, never a substitute for medical advice.
Additional Resources
Reference this content, page, or tool as:
"Contraction Timer" at https://MiniWebtool.com/contraction-timer/ from MiniWebtool, https://MiniWebtool.com/
by miniwebtool team. Updated: November 21, 2026
Chat with your favorite AI
For Gemini, paste the copied question into the chat. You can also copy it below.
View the question
Pregnancy Calculators:
- Breastfeeding Calorie Calculator
- Contraction Timer New
- Dog Pregnancy Calculator New
- Due Date Calculator
- Gestational Age Calculator
- hCG Doubling Time Calculator New
- How Many Weeks Pregnant Am I?
- Implantation Calculator New
- IVF Due Date Calculator New
- Pregnancy Calendar Popular
- Pregnancy Calorie Calculator
- Pregnancy Weight Gain Calculator